What is the best memory frequency for PRO B760-P WIFI with Ryzen Core i7-13700K?

For the MSI PRO B760-P WIFI motherboard and Intel Core i7-13700K processor pairing, the optimal memory sweet spot is 6000MT/s running at latency timings of CL32. This matches standard gear settings (1:1 memory controller clocks), delivering maximum bandwidth and lowest latency.

Does this setup support CUDIMM DDR5 memory?

Yes, CUDIMMs are physically pin-compatible and will fit. However, on this consumer hardware configuration, the integrated memory controller runs CUDIMMs in "Bypass Mode," disabling the clock driver chip. It operates identically to a standard UDIMM module, so we advise against paying a premium for CUDIMMs.

⚡ Verified System Diagnostics

RAM Specs for MSI PRO B760-P WIFI & Intel Core i7-13700K

Programmatic chipset analysis of CPU IMC thresholds, gear speeds, physical notches, and installation channel priority.

Motherboard Slot Type

DDR5 UDIMM

Sweet Spot Speed

6000MT/s

Sweet Spot Latency

CL32

Channel Mode Priority

Dual A2/B2

Hardware Compatibility Diagnostics

✓ Perfect Slot Notch Fit: Motherboard uses DDR5 slots, matching the processor's native memory controller.

HARDWARE LOGS TERMINAL

[SUCCESS] physical_key_notch: DDR5 aligned.

[SUCCESS] imc_gear_ratio: optimal 1:1 speed bound verified.

[NOTICE] bios_overclock: EXPO/XMP 1.0 setup required in motherboards.

[SYSTEM] checking motherboard QVL verified tables... done.

SOCKET: LGA1700IMC: DDR5 5600MHz

Interactive RAM Slot Optimizer

Motherboards daisy-chain memory traces. Select how many memory modules you plan to buy, and we will highlight the exact sockets to install them in to prevent bottlenecking.

Motherboard DIMM Slots (A2 & B2 Priority Channels)

DDR5 slots layout

RAM Stick

Best (A2)

RAM Stick

Best (A2)

✓Install your dual sticks in slots A2 and B2 (slots 2 & 4) to ensure dual-channel speeds are active! Installing them next to each other forces single-channel.

⚡ MSI Click BIOS 5 / Dragon Utility Instructions

All RAM ships running at stock low JEDEC speeds. To activate full rated 6000MT/s overclock speeds, follow these MSI-specific BIOS configuration steps:

1Enter the BIOS by pressing the "Delete" key upon powering on your system.
2In the upper-left corner of the EZ Mode screen, locate the circular "XMP" profile buttons.
3Click the "EXPO" or "A-XMP" Button to toggle it from grey (Disabled) to red (Enabled Profile 1).
4Under OC Settings ➔ Advanced DRAM Configuration, verify memory frequencies match sweet spot speeds.
5Press "F10", then click "Yes" to save and reboot.