What is the best memory frequency for X570 Aorus Elite with Ryzen Ryzen 5 5600G?

For the Gigabyte X570 Aorus Elite motherboard and AMD Ryzen 5 5600G processor pairing, the optimal memory sweet spot is 3600MT/s running at latency timings of CL16. This matches standard gear settings (1:1 memory controller clocks), delivering maximum bandwidth and lowest latency.

Does this setup support CUDIMM DDR5 memory?

Yes, CUDIMMs are physically pin-compatible and will fit. However, on this consumer hardware configuration, the integrated memory controller runs CUDIMMs in "Bypass Mode," disabling the clock driver chip. It operates identically to a standard UDIMM module, so we advise against paying a premium for CUDIMMs.

⚡ Verified System Diagnostics

RAM Specs for Gigabyte X570 Aorus Elite & AMD Ryzen 5 5600G

Programmatic chipset analysis of CPU IMC thresholds, gear speeds, physical notches, and installation channel priority.

Motherboard Slot Type

DDR4 UDIMM

Sweet Spot Speed

3600MT/s

Sweet Spot Latency

CL16

Channel Mode Priority

Dual A2/B2

Hardware Compatibility Diagnostics

✓ Perfect Slot Notch Fit: Motherboard uses DDR4 slots, matching the processor's native memory controller.

HARDWARE LOGS TERMINAL

[SUCCESS] physical_key_notch: DDR4 aligned.

[SUCCESS] imc_gear_ratio: optimal 1:1 speed bound verified.

[NOTICE] bios_overclock: EXPO/XMP 1.0 setup required in motherboards.

[SYSTEM] checking motherboard QVL verified tables... done.

SOCKET: AM4IMC: DDR4 3200MHz

Interactive RAM Slot Optimizer

Motherboards daisy-chain memory traces. Select how many memory modules you plan to buy, and we will highlight the exact sockets to install them in to prevent bottlenecking.

Motherboard DIMM Slots (A2 & B2 Priority Channels)

DDR4 slots layout

RAM Stick

Best (A2)

RAM Stick

Best (A2)

✓Install your dual sticks in slots A2 and B2 (slots 2 & 4) to ensure dual-channel speeds are active! Installing them next to each other forces single-channel.

⚡ Gigabyte UEFI DualBIOS Dashboard Instructions

All RAM ships running at stock low JEDEC speeds. To activate full rated 3600MT/s overclock speeds, follow these Gigabyte-specific BIOS configuration steps:

1Tap the "Delete" key repeatedly during the splash screen to open the UEFI dashboard.
2Locate the "Tweaker" tab (on some models, click "Advanced Mode" first).
3Find the "Extreme Memory Profile (X.M.P.)" or "Active EXPO" option.
4Change the setting from "Disabled" to "Profile 1".
5Confirm that System Memory Multiplier is set to Auto (matches EXPO speed).
6Press "F10" to save configs and exit.